Sub construction and assembly
For easy installation of the panels in system we have developed a special rail system made of galvanized steel. This consists of the following components:
Wall rail WL 21/48 and
Panel rail PL 16/48 (for installation with tongue) or
Panel rail PL 32/48 (for installation with back joints)
The suspension rails are supplied with a length of 4,000 mm. Both are optimally matched to the fastening areas of core panels elongated holes so-well in the horizontal and vertical alignment. Compared to other rails the akustik+ rail is achieved by the specific folding of the wall rail for an optimumg load destribution that is fixed plane to the panel and reduces the pressure resting on the screws.
The invisible fastening by hooking enables easy disassembly and is visually appealing than a direct screw. The panels can be removed quickly and easily, running behind the elements lines and tubes are easily accessible. In addition, the system allows a tension-free assembly of the elements and its subsequent adjustment. In principle, a stroke (20 mm) is necessary for all fixing methods by means of hooking to allow raising and lowering. The stroke remains visible as a shadow gap on the top of the wall.
The fastening system is load tested, the evidence may be consulted if necessary.